CT200 Injector Cleaning and Test Machine
CT200 machine is an injector cleaning and testing machine that includes ultrasonic cleaning, oil pressure controlled cleaning and inspection technology in one machine.
The machine can test 6 injectors at the same time, that makes you save time.
The machine also covers injectors of most cars and motorcycles. The machine has been a highly preferred device since its release.
CT200 Injector Cleaning and Test Machine Functions:
-It includes 12 special features for the Injector:
1- You can completely remove the dirt inside the injector with ultrasonic cleaning function.
2-The machine simulates engine idle speed and tests injector condition.
3-The machine simulates the engine running at medium speed and tests the injector situation.
4-The machine simulates a high-speed engine and tests the injector simulation.
5-The machine simulates the acceleration of the vehicle and tests the injectors.
6-The machine simulates the gear change of the car and tests the injector performance.
7-CT200 tests the leaking situation of the injector.
8- CT200 simulates the engine at idle and it tests the spraying situation of the injector.
9-The machine simulates the engine at medium speed and it tests the spraying situation of the injector.
10-CT 200 machine simulates the engine at high speed and it tests the spraying condition of the injector.
11- With the backwash function, the test liquid flows from the outlet to the inlet. Thanks to this function, the dirt inside the injector can be cleaned.
12-You can clean the injectors without disassembling them.
- The cleaning fluid can be reuse:
You can use the cleaning liquid later.
- The pressure can be measured:
The pressure can be monitored so that the damage caused by the pressure does not exist.
- You can see the test level:
You can clearly see the amount of liquid.
- You can test the injectors literally:
The uniformity of the injection quantity of the injectors can be tested.
The spraying status of all injectors can be tested.
The leak condition of the injectors can be tested.
Together with the CT200 injector cleaning and testing device, you can simultaneously clean and test 6-cylinder injectors.
How does the CT200 work?
Ultrasonic cleaning function
-Fill the cleaning fluid and replace the injectors.
-Connect the signal lines and start the machine.
Injector test function:
-Fill the test liquid and assemble the injectors.
-Then you can test the injector.
- 1 CT200 injector cleaning and testing machine
- 1 funnel
- 1 ultrasonic cleaning apparatus
- 2 drainage valves
- 2 fixing bars
- 2 fixing nuts
- 6 backwash attachments
- 6 adapter cables
- 1 power cable
- 1 oil separator
- 6 injector gaskets
- 5 oil separator special plugs
- 1 ultrasonic cleaning cloth
- 1 user manual